Study on the Uniaxial Tensile Fracture of Reinforcement Based on ABAQUS Secondary Development

Authors

  • Lizhen Shen

DOI:

https://doi.org/10.54097/27ybzq75

Keywords:

HRB400 reinforcement; VUSDFLD subroutine; ABAQUS platform; Uniaxial tensile failure.

Abstract

Taking Chinese HRB400 reinforcement as the research object, the maximum tensile stress criterion was embedded into the VUSDFLD subroutine for secondary development based on the ABAQUS platform. Additionally, the element deletion algorithm was introduced to simulate the uniaxial tensile failure of HRB400 reinforcement. The study found that the numerical results were in good agreement with the experimental results, providing a reference for the numerical model research of reinforced concrete structures.

Downloads

Download data is not yet available.

References

[1] Guoqiang Liu, Dongfang Zhang, Haoxiang Chen, et al., “Electrochemical corrosion behavior of 2304 duplex stainless steel bars in simulated concrete pore solution,” J. Chin. Soc. Corros. Prot., Vol. 44 (01), 2024, pp. 204-212.

[2] Yan Li, Qian Wei, Nan Shi, et al., “Bending test and numerical simulation of HB-FRP strengthened reinforced concrete beams,” Compos. Sci. Eng., pp. 1-14, [Online], 2024-02-24.

[3] Jianmin Zhang, “Forward modeling and testing for quality detection of double-layer reinforced linings,” Railway Constr., Vol. 63 (09), 2023, pp. 102-104.

[4] Zhongqiang Wang, Guan Huang, “Axial compression simulation study on UHPC reinforced concrete columns,” Henan Sci. Technol., Vol. 42 (13), 2023, pp. 72-77.

[5] Qiang Liu, “Numerical simulation analysis of the failure process of flexible fiber reinforced concrete box beams,” China Highway, Vol. 2023 (11), pp. 150-152.

[6] Jialiang Kou, Haifeng Jiang, Huahua Li, et al., “Experimental study and numerical simulation on axial compression performance of HDC reinforced damaged concrete columns,” J. Xi’an Univ. Technol., Vol. 39 (03), 2023, pp. 433-441.

[7] Guangran Liu, “Secondary development and research on crack propagation in surrounding rock of tunnels based on ABAQUS,” Shaanxi Water Conserv., Vol. 2023 (09), pp. 14-16.

[8] Jian Luo, Wencheng Li, “Constitutive study of rock cyclic loading and unloading based on modified Griffith criterion,” Min. Res. Dev., Vol. 41 (12), 2021, pp. 58-62.

[9] Yang Zhang, Yugui Cao, Zhili Hu, “Unified model for compressive strength of FRP-confined undamaged and damaged concrete based on Griffith failure criterion,” Acta Mater. Compos. Sin., Vol. 37 (09), 2020, pp. 2358-2366.

[10] Yaoting Zhang, Bigui Zhao, Ruige Li, et al., “Monotonic tensile and low-cycle fatigue performance of HRB400 steel bars,” Eng. Mech., Vol. 33 (04), 2016, pp. 121-129.

Downloads

Published

10-04-2025

How to Cite

Shen, L. (2025). Study on the Uniaxial Tensile Fracture of Reinforcement Based on ABAQUS Secondary Development. Highlights in Science, Engineering and Technology, 137, 14-19. https://doi.org/10.54097/27ybzq75